Dental Crowns
A dental crown is a tooth-shaped cap
that is placed over
a tooth - covering the tooth to restore its shape and size, strength,
and/or to improve its appearance.
The crowns, when cemented into place, fully encase the entire visible
portion of a tooth that lies at and above the gum line.
Why is a Dental Crown Needed?
A dental crown may be needed when at least one of the following
occurs:
- - To protect a weak tooth (for instance, from decay) from breaking
or to hold together parts of a cracked tooth
- - To restore an already broken tooth or a tooth that has been
severely worn down
- - To cover and support a tooth with a large filling when there
isn't a lot of tooth left
- - To hold a dental bridge in place
- - To cover misshaped or severely discolored teeth
- - To cover a dental implant
What Types of Crown Materials are Available?
Permanent crowns can be either all metal, porcelain-fused-to-metal,
all resin, or all ceramic.
- Metals used in crowns include gold alloy, other alloys
(for example, palladium) or a base-metal alloy (for example, nickel
or chromium). Compared with other crown types, less tooth structure
needs to be removed with metal crowns, and tooth wear to opposing
teeth is kept to a minimum. Metal crowns withstand biting and
chewing forces well and probably last the longest in terms of
wear down. Also, they rarely chip or break. The metallic color
is the main drawback. Metal crowns are a good choice for out-of-sight
molars.
- Porcelain-fused-to-metal dental crowns can be color matched
to your adjacent teeth (unlike the metallic crowns). However,
more wearing to the opposing teeth occurs with this crown type
compared with metal or resin crowns. The crown's porcelain portion
can also chip or break off. Next to all-ceramic crowns, porcelain-fused-to-metal
crowns look most like normal teeth. However, sometimes the metal
underlying the crown's porcelain can show through as a dark line,
especially at the gum line and even more so if your gums recede.
These crowns can be a good choice for front or back teeth.
- All-resin dental crowns are less expensive than other
crown types. However, they wear down over time and are more prone
to fractures than porcelain-fused-to-metal crowns.
- All-ceramic or all-porcelain dental crowns provide the
best natural color match than any other crown type and may be
more suitable for people with metal allergies. However, they are
not as strong as porcelain-fused-to-metal crowns and they wear
down opposing teeth a little more than metal or resin crowns.
All-ceramic crowns are a good choice for front teeth.
- Temporary versus permanent. Temporary crowns can be made
in your dentist's office whereas permanent crowns are made in
a dental laboratory. Temporary crowns are made of acrylic or stainless
steel and can be used as a temporary restoration until a permanent
crown is constructed by the dental laboratory.
What Steps are Involved in Preparing a Tooth for a Crown?
Preparing a tooth for a crown usually requires two visits - the
first step involves examining and preparing the tooth, the second
visit involves placement of the permanent crown.
- Examining and preparing the tooth. At the first visit,
your dentist may take a few x-rays to check the roots of the tooth
receiving the crown and surrounding bone. If the tooth has extensive
decay or if there is a risk of infection or injury to the tooth's
pulp, a root
canal treatment may first be performed.
Before the process of making your crown is begun, your dentist
will anesthetize your tooth and the gum tissue around the tooth.
Next, the tooth receiving the crown is filed down along the chewing
surface and sides to make room for the crown. The amount removed
depends on the type of crown used (for instance, all-metal crowns
are thinner, requiring less tooth structure removal than all-porcelain
or porcelain-fused-to-metal ones). If, on the other hand, a large
area of the tooth is missing (due to decay or damage), your dentist
will use filling material to build up
the tooth enough
to support the crown.
After reshaping the tooth, your dentist will use impression paste
or putty to make an impression of the tooth to receive the crown.
Impressions of the teeth above and below the tooth to receive
the dental crown will also be made to make sure that the crown
will not affect your bite.
The impressions are sent to a dental laboratory where the crown
will be manufactured. The crown is usually returned to your dentist's
office in 2 to 3 weeks. If your crown is made of porcelain, your
dentist will also select the shade that most closely matches the
color of the neighboring teeth. During this first office visit
your dentist will make a temporary crown to cover and protect
the prepared tooth while the crown is being made. Temporary crowns
usually are made of acrylic and are held in place using a temporary
cement.
- Receiving the permanent dental crown. At your second
visit, your dentist will remove your temporary crown and check
the fit and color of the permanent crown. If everything is acceptable,
a local anesthetic will be used to numb the tooth and the new
crown is permanently cemented in place.
How Should I Care for My Temporary Dental Crown?
Because temporary dental crowns are just that - a temporary fix
until a permanent crown is ready, most dentists suggest that a few
precautions be taken with your temporary crown. These include:
- Avoid sticky, chewy foods (for example, chewing gum, caramel),
which have the potential of grabbing and pulling off the crown.
- Minimize use of the side of your mouth with the temporary crown.
Shift the bulk of your chewing to the other side of your mouth.
- Avoid chewing hard foods (such as raw vegetables), which could
dislodge or break the crown.
- Slide flossing material out-rather than lifting out-when cleaning
your teeth. Lifting the floss out, as you normally would, might
pull off the temporary crown.
What Problems Could Develop With a Dental Crown?
- Discomfort or sensitivity. Your newly crowned tooth may
be sensitive immediately after the procedure as the anesthesia
begins to wear off. If the tooth that has been crowned still has
a nerve in it, you may experience some hot and cold sensitivity.
Your dentist may recommend that you brush your teeth with a toothpaste
designed for sensitive teeth. Pain or sensitivity that occurs
when you bite down usually means that the crown is too high on
the tooth. If this is the case, call your dentist. He or she can
easily fix this problem.
- Chipped crown. Crowns made of all porcelain can sometimes
chip. If the chip is small, a composite resin can be used to repair
the chip with the crown remaining in your mouth. If the chipping
is extensive, the crown may need to be replaced.
- Loose crown. Sometimes the cement washes out from under
the crown. Not only does this allow the crown to become loose,
it allows bacteria to leak in and cause decay to the tooth that
remains. If your crown feels loose, contact your dentist's office.
- Crown that falls off. Sometimes crowns fall off. Usually
this is due to an improper fit or a lack of cement. If this happens,
clean the crown and the front of your tooth. You can replace the
crown temporarily using dental adhesive or temporary tooth cement
that is sold in stores for this purpose. Contact your dentist's
office immediately. He or she will give you specific instructions
on how to care for your tooth and crown for the day or so until
you can be seen for an evaluation. Your dentist may be able to
re-cement your crown in place; if not, a new crown will need to
be made.
- Allergic reaction. Because the metals used to make crowns
are usually a mixture of metals, an allergic reaction to the metals
or porcelain used in crowns is extremely rare.
- Dark line on crowned tooth next to the gum line. A dark
line next to the gum line of your crowned tooth is normal, particularly
if you have a porcelain-fused-to-metal crown. This dark line is
simply the metal of the crown showing through.
What are Onlays
and 3/4 Crowns?
These are variations on the technique of dental crowns. The difference
between these crowns and the crowns discussed previously is their
coverage of the underlying tooth - the "traditional" crown
covers the entire tooth; onlays and 3/4 crowns cover the underlying
tooth to a lesser extent.
How Long Do Dental Crowns Last?
On average, dental crowns last between 5 and 15 years. The life
span of a crown depends on the amount of "wear and tear"
the crown is exposed to, how well you follow good oral hygiene practices,
and your personal mouth-related habits (you should avoid such habits
as grinding or clenching your teeth, chewing ice, biting your fingernails
and using your teeth to open packaging).
Does a Crowned Tooth Require any Special Care?
While a crowned tooth does not require any special care, remember
that simply because a tooth is crowned does not mean the underlying
tooth is protected from decay or gum disease. Therefore, continue
to follow good oral hygiene practices, including brushing your teeth
at least twice a day and flossing once a day-especially around the
crown area where the gum meets the tooth.
Dr. Thomas L. Meyer - Providing services in cosmetic dentistry and invisalign to the areas of Chicago and Des Plaines, Illinois.
Des Plaines Dentistry
© copyright 1999 - 2008, Thomas L. Meyer, DDS - Meyer Dental Group, all rights reserved